Microteknik

Microteknik

Microteknik

ISO 9001:2015 Certified

Sadar Bazar, Ambala, Haryana

Fluid Mechanics Lab Equipments

In our range, we offer Study of Pipe Fittings, Orifice & Mouthpiece Apparatus, Bernoulli''s Theorem Apparatus, Friction in Pipe Lines Apparatus, Notch Apparatus, Metacentric Height Apparatus, Impact of jet on Vanes Apparatus, Nozzle Meter Apparatus, Pipes in Parallel, Hydraulic Bench with Accessories, Reynolds Apparatus, Pitot Static Tube Apparatus, Helical Coil Apparatus, Equivalent length of pipes, Pipes in series, Venturi meter, Orifice meter & Rotameter Apparatus.

Demonstration of Hydraulic Bench

REQUEST CALLBACK
  • Demonstration of Hydraulic Bench
  • Demonstration of Hydraulic Bench

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Demonstration of Hydraulic Bench
The Hydraulic Bench is of volumetric type and has been designed to provide continuous and controlled supply of water to conduct various experiments using auxiliary modules in typical Fluid Mechanics and Hydraulics Laboratory. The unit is an ideal service unit for conducting student projects. Once filled, no external water supply is required. Water is recycled between the Experiment Module, Measuring Tank and the Storage Tank by the Centrifugal Pump.Several experiments in Fluid Mechanics and Hydraulics require continuous and controlled supply of water. The Basic Hydraulic Bench provides a controlled recirculation water supply to conduct experiments.The Basic Hydraulic Bench is a very important module and is recommended for all Fluid Mechanics and Hydraulics Laboratories in Educational Institutions. It is a basic module for flow related experiments using auxiliary modules. A list of common experiments that can be conducted using the Basic Hydraulic Bench is given below:
  • Impact of a Jet
  • Flow over Weirs
  • Bernoulli’s Theorem Demonstration
  • Orifice Discharge
  • Energy Loss in Bends
  • Osborne Reynolds Demonstration
  • Energy Loss in Pipes
  • Hydrostatic Pressure
  • Flow Visualization in Channels
  • Dead Weight Calibrator
  • Metacentric Height
  • Series & Parallel Pumps
  • Centrifugal Pump Characteristics
  • Free and Forced Vortices
  • Water Hammer
  • Pelton Turbine
  • Orifice & Free Jet Flow
  • Flow Meter Demonstration
  • Cavitations Phenomenon Demonstration
  • Laminar Flow Demonstration
  • Radial Flow Turbine
  • Venturi, Bernouli and Cavitation
  • Pipe Friction Apparatus
  • Equipment for the Study of Porous Beds in Venturi Tubes
  • Flow Channel 1m Length
  • Depression Measurement System (Vacuum Gauge) Axial Flow Turbine
  • Pump Impeller Display Panel

Features

1. Self contained and fully portable mobile unit with welded frame.2. Light weight body made of reinforced fiber glass and corrosion resistant materials.3. Closed water circuit consisting of Measuring Tank, Storage Tank and the Centrifugal Pump.4. Control valve to regulate the pump and adjust the flow rate.5. Work space on Bench Top has integrated flow channel for flow measurements using Weirs and is fitted with stepped edge to ensure safe and easy mounting of experiment modules.6. Suitable pipe connectors are provided in the Bench Top to enable easy change of experiment modules. 7. Graduated and stepped Measuring Tank for both low and high volume flow rates.

Send Bulk Enquiry

Free and Forced Vortex Flow

REQUEST CALLBACK
  • Free and Forced Vortex Flow
  • Free and Forced Vortex Flow

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Free and Forced Vortex Flow

Free and Forced Vortex Flow apparatus offered by us has been painstakingly designed by our team of expert professionals. This apparatus enables the researchers to determine the shape of the vortex profile. With the accuracy of the results it provides, this apparatus is very popular in the market. Created using optimum quality materials and cutting edge technology, this delivers flawless performance. We subject it to quality tests based on multiple parameters before making it available to the customers.

Range Of Experiments
  • To visualize the forced & free vortex phenomenon.
  • To plot the shape of vortex profile i.e. vertical height vs horizontal radius.

Send Bulk Enquiry

Basic Hydraulic Bench

REQUEST CALLBACK
  • Basic Hydraulic Bench
  • Basic Hydraulic Bench

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Basic Hydraulic Bench The Basic Hydraulic Bench is of volumetric type and has been designed to provide continuous and controlled supply of water to conduct various experiments using auxiliary modules in typical Fluid Mechanics and Hydraulics Laboratory. The unit is an ideal service unit for conducting student projects. Once filled, no external water supply is required. Water is recycled between the Experiment Module, Measuring Tank and the Storage Tank by the Centrifugal Pump.Several experiments in Fluid Mechanics and Hydraulics require continuous and controlled supply of water. The Basic Hydraulic Bench provides a controlled recirculation water supply to conduct experiments.The Basic Hydraulic Bench is a very important module and is recommended for all Fluid Mechanics and Hydraulics Laboratories in Educational Institutions. It is a basic module for flow related experiments using auxiliary modules.

A list of common experiments that can be conducted using the Basic Hydraulic Bench is given below:

1. Impact of a Jet2. Flow over Weirs3. Bernoulli’s Theorem Demonstration4. Orifice Discharge5. Energy Loss in Bends6. Osborne Reynolds Demonstration7. Energy Loss in Pipes8. Hydrostatic Pressure9. Flow Visualization in Channels10. Dead Weight Calibrator11. Metacentric Height12. Series & Parallel Pumps13. Centrifugal Pump Characteristics14. Free and Forced Vortices15. Water Hammer16. Pelton Turbine17. Orifice & Free Jet Flow18. Flow Meter Demonstration19. Cavitations Phenomenon Demonstration20. Laminar Flow Demonstration21. Radial Flow Turbine22. Venturi, Bernouli and Cavitation 23. Pipe Friction Apparatus24. Equipment for the Study of Porous Beds in Venturi Tubes25. Flow Channel 1m Length26. Depression Measurement System (Vacuum Gauge)27. Axial Flow Turbine 28. Pump Impeller Display Panel

Features

1. Self contained and fully portable mobile unit with welded frame.2. Light weight body made of reinforced fiber glass and corrosion resistant materials.3. Closed water circuit consisting of Measuring Tank, Storage Tank and the Centrifugal Pump.4. Control valve to regulate the pump and adjust the flow rate.5. Work space on Bench Top has integrated flow channel for flow measurements using Weirs and is fitted with stepped edge to ensure safe and easy mounting of experiment modules.6. Suitable pipe connectors are provided in the Bench Top to enable easy change of experiment modules. 7. Graduated and stepped Measuring Tank for both low and high volume flow rates.8. Level Indicators for water level are provided in the Open Channel and Measuring Tank.9. Variable area Flow Meter (10-75 liters per minute) is also provided to measure flow rate independently. 10. Stilling baffles are provided to reduce turbulence.11. Sight tube with scale provided to indicate instantaneous water level.12. Bull’s eye level is provided to ensure proper position of the Bench and accurate reading of levels.13. Remote Actuator provided to operate the Dump Valve at the base of Measuring Tank 14. Over Flow provided in Measuring Tank to avoid flooding. 15. Separate Storage Tank Outlet facility provided to enable the Bench to be used in any hydraulic circuit.16. Push button starter provided for the centrifugal pump.17. Power supply includes over-load and under-voltage protection.

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Cavitation Demonstration

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Cavitation Demonstration
We are engaged in manufacturing supplying and exporting the best quality of Cavitation Demonstration Unit. By using advanced Technology Being customer centric brand, we are manufacturing and supplying supreme quality Cavitation Demonstration Unit for our esteemed customers. This Cavitation Demonstration Unit is processed using high quality raw material which ensures its standard quality and long service life. Our presented product passes through diverse quality parameters for inspection. Moreover, it can be availed from us at reasonable costs.
Features:
  • High load bearing capacity
  • Compact design
  • High performance

Send Bulk Enquiry

Flow Measurement Apparatus

REQUEST CALLBACK
  • Flow Measurement Apparatus
  • Flow Measurement Apparatus

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Flow Measurement Apparatus
Item code: MTS-14007

Cherished as a reliable manufacturer, supplier and exporter, we have been able to offer the optimum quality of Flow Measurement Apparatus. Designed as per the industry laid norms, the offered apparatus is used for accurate measurement of flow of liquid or gases. Rendered by us at cost effective prices, the flow measurement apparatus are known for their precise flow measurement capacity.
To measure the discharge of an essentially incompressible fluid using a venturimeter, an orifice plate meter and a rotometer whilst at the same time giving applications of the steady flow energy equation (Bernoulli’s Equation).Determination of Head losses associated with each meter and compared as well as those arising in a rapid enlargement and a 90 degree elbow.
Features:
  • Compact design
  • Precise flow measurement
  • Easy to use and maintain

Additional Information:

Item Code: MTS-14007

Send Bulk Enquiry

Reynolds Apparatus

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
MaterialMS/SS

Reynolds Apparatus
Reynold’s Apparatus Complete with Collecting Tank: We are among the trusted names engaged in the manufacturing, trading and exporting of best quality Reynolds Apparatus. The set-up we offer is basically a self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Our professionals manufacture this apparatus in accordance with the industry set parameters using best quality raw materials. This apparatus is used to measure flow rate and is available at affordable market prices.
Experiments
  • To determine the Reynold's number and hence the type of flow either laminar or turbulent

Technical Specifications
Tube Material Borosilicate Glass Dye vessel Material Stainless Steel, Suitable Capacity Capillary Tube Material Copper/Stainless Steel Constant Head Water Tank: Capacity 40 Ltrs Water Circulation FHP Pump, Champion/ godrej make Flow Measurement: Using Measuring Cylinder Sump Tank Capacity: 60 Ltrs Stop Watch: Electronic Control Panel C

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Flow Meter Demonstration

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Flow Meter Demonstration
Microteknik are offering a wide reange of Flow Meter Demonstration Unit.This experiment has been done to measure the flow rate and associated pressure losses with three devices which is venturi meter, orifice meter and variable area meter. First of all, we must close the ball valve and measure the time taken to accumulate a known volume of fluid in the tank, as measure from the sight-glass. Then, we record all the manometer height and the variable area meter reading and carry out a timed volume collection using the volumetric tank.
OBJECTIVES of Flow Meter Demonstration
To investigate and contrast the operation and characteristics of three different basics types of flow meter which venture, variable, and orifice including accuracy and energy losses.To measure a pressure drop at different segment of device.To determine a flow rate through a pipe.

Send Bulk Enquiry

Fluid Friction In Pipes Determination Unit

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
MaterialMS

Fluid Friction in Pipes Determination unit
We offer highly demanded Losses due to friction in pipe line at the most competitive market price. Manufactured in accordance with the industry laid parameters, offered apparatus is highly demanded around the globe. The setup is designed to study the losses due to friction in pipes of different diameters and materials. This consists of a set of 3 different pipe test sections, supply tank, measuring tank and pump for closed loop water circulation.
Experiments
  • To determine the losses due to fiction in pipes

Utilities Required
  • Electric supply 0.5 kW, 220V AC, Single Phase
  • Water supply Tap water connection ” BSP Distilled water @ 60 liters (optional)
  • Floor Area with Drain facility

Technical Specifications
Pipes (2 Nos.): Material GI of ½” & 1” diameter
• Pipe Test Section Length: 1 m.
• Instruction Manual

Send Bulk Enquiry

Impact Of Jet Apparatus

REQUEST CALLBACK
  • Impact Of Jet Apparatus
  • Impact Of Jet Apparatus

Ask for Price

Product Price: Ask Latest Price

Product Details:

ConditionNew
BrandTeknik

Impact Of Jet Apparatus
We are counted among the most prominent manufacturers, traders and exporters of high quality Impact of jet of vanes. Designed in compliance with industry leading parameters, it is used to study the forced developed of a jet of water on different surfaces and to compare it with momentum theory. Offered set up consists of visible test enclosure, supply tank, measuring tank and pump for closed loop water circulation.
Description
The setup consists of a two sided clear fabrication section. Water is fed through a nozzle and discharged vertically to strike a target carried on a stem which extends through the cover. A weight carrier is mounted on the upper end of the stem. The dead weight of the moving parts is counter balanced by a compression spring. The vertical force exerted on the target plate is measured by adding the weights supplied to the weight pan until the mark on the weight pan corresponds with the level gauge. A total of two targets are provided, a flat plate and a hemispherical cup.Experimentation:
• To measure the force developed by a jet of water impinging upon a stationary object and comparison with the forces predicted by the momentum theoryUtilities required:
• Hydraulic Bench

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Rotameter Apparatus

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Rotameter Apparatus
Item code: MTS-3524

We are engaged in the manufacturing, exporting and trading of premium quality Rotameter Apparatus.Manufactured in accordance with the industry set parameters using best quality raw materials, this apparatus is used to determine the co-efficient of discharged through a venturimeter or orifice meter. Furthermore, the offered apparatus is also used to calibrate the rotameter.
Experiments
  • To determine the co-efficient of discharged through Venturimeter and orifice meter. To measure discharge through Venturimeter, Orificemeter and Rotameter
  • To calibrate the Rotameter.

Utilities Required
  • Water Supply & Drain• Electricity 0.5 kW, 220V AC, Single Phase Technical

Specifications
Electric Supply: 230V 50Hz. With proper earthing• Exterior material: Stainless steel plate baked enamel• Temp. range: -70 to 150oC• Power: Electronic,AC 1 phase 220V; 3 phase 380V 60/50

Additional Information:

Item Code: MTS-3524

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: India

Send Bulk Enquiry

Notch Apparatus

REQUEST CALLBACK
  • Notch Apparatus
  • Notch Apparatus

Ask for Price

Product Price: Ask Latest Price

Product Details:

MaterialMS/SS

Notch Apparatus
we are manufacturing, exporting and supplying highly efficient Notch Apparatus. The offered apparatus is designed by our skilled professionals in compliance with international quality standards. Our provided range is manufactured using the latest technology and the finest raw materials. Moreover, our offered range is tested on various stringent parameters to ensure its durability and quality. Clients can avail this range from us in customized options at industry leading prices.
Features
  • Noiseless & hassle free operations
  • Precisely designed
  • Low maintenance

Specifications
  • Measuring tank: 1000 mm x 300 mm x 300 mm
  • Sump Tank sizes: 300 mm x 300 mm x 600 mm

Send Bulk Enquiry

Impact Of Jet Apparatus

REQUEST CALLBACK
  • Impact Of Jet Apparatus
  • Impact Of Jet Apparatus

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Impact Of Jet Apparatus

Microteknik are offering a wide range of Impact Of Jet Apparatus.The unit comprises a plexiglas tank in which a water jet discharged from a nozzle hits a surface and is deflected. 4 different test shapes with the following deflection angles are included: plate 90°, hemisphere 180°, angled plate 45!, cone 135°. The impact forces at the deflector are measured using scales loaded with weights. The water supply is provided either from the laboratory mains or using the HM 150 (closed water circuit).Learning Objectives /
Experiments of Impact Of Jet Apparatus
  • A hemisphere, a cone, an angled and a flat plate are provided as deflector:
  • Impulse-momentum; direct measurement of impa forces
  • Effect of flow rate and velocity
  • Effect of various deflection angles

Specification of Impact Of Jet Apparatus
  • Cylindrical operating area made of Plexiglas,
  • Measurement of jet impact forces with weights
  • interchangeable deflectors
  • Unit mounted on base plate,

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Orifice and Mouthpieces Apparatus

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

ConditionNew
BrandTeknik

Orifice and Mouthpieces Apparatus

Item Code: MTS-3522Our company offers optimum quality Orifice and Mouthpiece Apparatus at the most reasonable market price. This apparatus is manufactured under the supervision of expert professionals, using best quality raw materials. The apparatus manufactured by us is used for the purpose of measuring fluid flowing through an open channel. Offered apparatus is exclusively demanded in various hydraulic industries for accurate performance and hassle-free installation.

Experiments

  • To determine the co-efficient of discharge of different Orifice and mouthpiece
Utilities Required

Electric supply 0.5 kW, 220V AC, Single Phase• Water supply Tap water connection ” BSP Distilled water @ 60 liters (optional)
Floor Area with Drain facility 

Technical Specifications

Sudden Enlargement: From 13 mm to 23 mm
Sudden Contraction: From 20 mm to 16 mm• Electric supply: 0.5 kW, 220V AC, Single Phase

Send Bulk Enquiry

Series and Parallel Pumps Demonstration Unit

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Series And Parallel Pump Test Set
Micro Teknik are offering a wide range of Series And Parallel Pump Demonstration Unit.
Features of Series and Parallel Pumps Demonstration Unit
Investigation and operating behaviour of pumps in various operating modes single pump, series or parallel pump operation, configurable via valves closed water circuit contains centrifugal pumps with drive motor and a transparent water tank.one pump with variable speed and one pump with fixed speed adjustment of flow resistance by a valve in the delivery pipesensors for pressure on intake and delivery sides of the pumps and flow rate microprocessor-based measuring technique.

Send Bulk Enquiry

Flow Channel Lab Equipment

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Flow Channel of Fluid Mechanics Lab Equipments
Micro Teknik are offering a wide range of Flow Channel of Fluid Mechanics Lab Equipments. Flow Channel of Fluid Micro Teknik are offering a wide range of Flow Channel of Fluid Mechanics Lab Equipments. Flow Channel Flow Channel equipment allows the student to study water flow in an open channel and also verify the Chézy equation and Mannings Friction Factor. It is designed for use with Hydraulics Bench fitted with Auxiliary Pump Unit, but can be used as a standalone unit when connected to a suitable water supply and drain. The channel is supplied with weir, scales and tilt capability.

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Series and Parallel Pumps Demonstration Unit

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Series And Parallel Pump Test Set
Micro Teknik are offering a wide range of Series And Parallel Pump Demonstration Unit.
Features of Series and Parallel Pumps Demonstration Unit
Investigation and operating behaviour of pumps in various operating modes single pump, series or parallel pump operation, configurable via valves closed water circuit contains centrifugal pumps with drive motor and a transparent water tank.one pump with variable speed and one pump with fixed speed adjustment of flow resistance by a valve in the delivery pipesensors for pressure on intake and delivery sides of the pumps and flow rate microprocessor-based measuring technique.

Send Bulk Enquiry

Gear Pump Demonstration Unit

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
ConditionNew

Gear Pump Demonstration Unit
Microteknik are Manufacturer, Exporter & Supplier of Gear Pump Demonstration Unit.The setup is designed to study the performance of Gear Pump.Set up consists of a gear pump having a pair of meshed gears coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop oil circulation. Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement.The flow rate of water is measured using measuring tank and stop watch provided.
Experiments of Gear Pump
  • To determine overall efficiency and pump efficiency of the gear pump.
  • To plot Head vs. Discharge, Pump efficiency vs. Discharge

Features
  • Closed loop circulation
  • Compact & stand alone set up
  • Stainless Steel tanks and wetted parts
  • Superb Painted structure
  • Simple to operate & maintain

Send Bulk Enquiry

Centrifugal Fan Demonstrator

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Centrifugal Fan Demonstrator
Microteknik are offering a wide range of Centrifugal Fan Demonstrator. The unit is mounted on a stable base plate and contains the fan with intake and pressure pipe as well as the recording device for the air flow rate, temperature, fan speed, intake and conveying pressure. The centrifugal fan demonstration unit with acquisition is a demonstration model for instructional and experimental use in vocational schools, specialised colleges and universities.

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Orifice and Free Jet Flow

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Orifice And Jet Velocity Apparatus
Item code: MTS-14017

Microteknik are offering a wide range of Orifice And Jet Velocity Apparatus.Orifice and Free Jet Flow A plexiglas cylinder is equipped with an adjustable overflow and scale which enables the height of the water column to be set and read accurately. 2 types of outlet nozzle can be compared. The trajectory of the jet can be traced using adjustable probes and recorded on a white panel.

Experiments Orifice And Jet Velocity Apparatus
  • Discharge coefficient from nozzles of varying sizes and shapes
  • Trajectory of the water jet for various discharge velocities
  • Effect of the height of the water column on discharge velocity

Specification of Orifice and Free Jet Flow
  • Unit for investigating the discharge from nozzles, for use with the HM 150
  • Draining of a water-filled Plexiglass cylinder through a nozzle
  • Cylinder with adjustable overflow and scale
  • 2 exchangeable nozzles
  • 8 tracers and white panel to record the jet trajectory

Additional Information:

Item Code: MTS-14017

Send Bulk Enquiry

Compressible Flow Unit

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Compressible Flow Bench

Microteknik are offering a wide range of Compressible Flow unit, Compressible Flow Bench Unit. We are engaged in offering genuine quality Compressible Flow Bench to the customers, as per the market demand. Apparatus comprising a four-stage variable speed motor driven air compressor with seven interchangeable test sections with all necessary instrumentation to conduct experiments.

Technical Specification

Convergent/divergent duct Three ducts of different diameters each with two pressure sensing rings Sudden enlargement Test sections for a range of orifice plates

Experimental Capabilities

Pressure-flow characteristics for a convergent/divergent duct, demonstrating 'choking' effect Pressure-flow characteristics for a convergent duct Verification of the equation for is entropic flow in a convergent duct Determination of y for air Determination of diffuser efficiency Pressure recovery after sudden enlargement Relation between friction head and velocity in a given pipe ariation of friction coefficient with Reynolds' number for pipes of various diameters Relation between head loss in a bend and flow velocity Pressure-flow characteristics of pipeline orifices Variation of orifice coefficient with orifice diameter/pipe diameter ratio Variation of orifice coefficient with absolute pressure ratio Compressor characteristics at constant speed: pressure flow, power flow, efficiency flow Comprehensive performance characteristics for compressor.Energy balance for compressor

Send Bulk Enquiry

Hydrostatic Pressure Testing Equipment

REQUEST CALLBACK
  • Hydrostatic Pressure Testing Equipment
  • Hydrostatic Pressure Testing Equipment

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Hydrostatic Pressure Testing Equipment
Our organization is regarded among the top most manufacturers, wholesalers and exporters of optimum quality of Hydrostatic Pressure Testing Equipment.
  • Pressure Range : 0 100 kg / cm sq
  • Pressure Range : 0 100 kg / cm sq
  • Time totalizer : Digital presettable with range upto 999.9 hours.
  • No. of station : 3 nos
  • Pressure input : Through compressed air having pressure upto 5 kg / cm sq.
  • Pressure output : Through hydro-pneumatic pump.
  • Panel mounting : Trolly with caster wheel.
  • Paint : Powder coated.
  • Power : 230V, 50 Hz single phase.

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Orifice Discharge

REQUEST CALLBACK
  • Orifice Discharge
  • Orifice Discharge

Ask for Price

Product Price: Ask Latest Price

Product Details:

ConditionNew
MaterialMS/SS

Orifice Discharge
We are offering a wide range of fluid Mechanic lab equipment for engineering colleges. Our company offers optimum quality Orifice Discharge Apparatus at the most reasonable market price. This apparatus is manufactured under the supervision of expert professionals, using best quality raw materials. The apparatus manufactured by us is used for the purpose of measuring fluid flowing through an open channel. Offered apparatus is exclusively demanded in various hydraulic industries for accurate performance and hassle-free installation.
Specification Of Orifice Discharge

Flow through an Orifice Apparatus To be used with Hydraulics Bench. For measurement of contraction and velocity and discharge coefficients for orifice discharge. Clear acrylic cylinder with adjustable constant head. Water admittance via wire mesh discharge head. Orifice at the bottom of the cylinder. Traverse assembly below the cylinder, with wire and pitot tube. The wire measures jet diameter, pitot tube measures jet velocity. Velocity head on pitot tube and total head are indicated on manometer tubes.

Send Bulk Enquiry

Laminar Turbulent Flow Apparatus

REQUEST CALLBACK
  • Laminar Turbulent Flow Apparatus
  • Laminar Turbulent Flow Apparatus

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
MaterialMS/SS

Laminar Turbulent Flow Apparatus
Our company is the major in offering Laminar Turbulent Flow Apparatus to the clients. This product is widely used to measures. Laminar Turbulent Flow Apparatus is offered in different specifications as per client’s requirements. Offered range is highly acknowledged among clients due to its impeccable finish, excellent robustness and optimum performance.
Features:
  • Low maintenance
  • Less space consumed
  • High efficiency
RANGE OF EXPERIMENTS
  • Laminar /Turbulant flow study with respect Reynold number
  • Head loss comparison in Laminar /Turbulent flow
  • Velocity profile in Laminar /Turbulent flow using pitot tube

Send Bulk Enquiry

Structural Lab Equipment

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
MaterialMS

Structural Lab Equipment:
We are manufacturers of structural analysis equipments and we are supplied all equipments of structural lab in all famous institute and engg colleges through out India. Below mentioned is.The Three Hinged Arch Apparatus manufactured, exported, imported and supplied by our company, consists of a curved beam mounted on two fixed supports and usually featuring the so-called crown hinge at its crown. The hinges on the two fixed supports absorb vertical and horizontal forces, and are known as abutment hinges. Their connecting line is the springing line. The crown hinge renders the system statically determinate.

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Fluid Friction Measurements

REQUEST CALLBACK
  • Fluid Friction Measurements
  • Fluid Friction Measurements

Ask for Price

Product Price: Ask Latest Price

Product Details:

MaterialMS/SS

FLUID FRICTION MEASUREMENT
We are offering a wide range of fluid friction Measurement apparatus.
Descriptions Of Fluid Friction Measurement
The equipment also includes a Pitot-static tube. By traversing the Pitot across the pipe diameter, students can find the velocity profile and flow coefficients. They also find the relationship between the flow rate and pressure differential.An artificially roughened pipe allows students to study friction factor at different Reynolds numbers, covering the interesting transitional flow from laminar to turbulent.They can compare results to those predicted by Nickuradse’s results and a Moody chart. The purpose of this article is to design a mechatronics system to measure fluid friction losses in a specially designed fluid friction apparatus. It measured fluid flow rates by using venturi tube and orifice plate, and velocity of fluid is calculated in terms of flow rate and pipe diameter. Friction factor of some valves and fittings such as tee, elbow, Y Junction, gate and globe valves and friction losses in pipe was measured in this system. It is one of the best methods to measure losses in pipes and fittings experimentally. pressure differential transmitters, venturi tube and orifice meter to measure the flow rate, pressure drops on flow rate measurement devices and pressure drops of some valves and fittings to be measured K factors. It also measured the temperature of fluid by using J type Thermocouple. A computer program is written to calculate the Reynold number of fluid, friction factor of pipe, velocity of fluid, frictional losses of fluid, flow rate and K factor of valves and fittings. Required data was received from measured quantities.

Standard Features
• Supplied with a comprehensive user guide• Two-year warranty• Manufactured in accordance with the latest Indian Union directives
Shows flow and losses in different pipes, fittings and valves. Shows popular flow measurement instruments.
• A space-saving vertical panel that works with Gravimetric or Volumetric HydraulicBenches for easy installation• Includes different valves, pipes and fittings to show losses• Includes experiments on roughened pipes• Shows laminar and turbulent flow• Uses Bernoulli’s equation • Shows how to use Venturi and orifice meters to measure flow • Includes a traversing Pitot tube to measure velocity profile

Send Bulk Enquiry

Blaine Air Permeability Apparatus

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
ConditionNew
PortableNon Portable

Blaine Air Permeability Apparatus
With the assistance of skilled professionals, we trade and supply a qualitative range of Blaine Air Permeability Apparatus. These permeability apparatus are perfectly developed by our practiced experts in compliance with the market norms. Along with this, the offered permeability apparatus are examined under the observation of quality experts in order to dispatch quality range. The permeability apparatus offered by us is best in quality, and are thus, broadly preferred by our customers.
The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type air permeameter.
Specifications of Blaine Air Permeability Apparatus
The apparatus consists one each of permeability cell 12.5mm I.D., Manometer 'U' type mounted on stand with a built in stop cock, Perforated disc, Plunger Rubber stopper, Rubber tube 30cm long. Packet of 12 filter paper discs and a bottle of 100cc dibutyiphthalate liquid.Spares and Accessories:Punch to cut filter paper discs. Non-perforated disc. Suction bulb.
Features

  • Easy to handle
  • Superior performance
  • Sturdy design

Send Bulk Enquiry

Sedimentation Studies Apparatus

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Sedimentation Studies Apparatus MTS-907
Our expertise in the field of manufacturing has helped us satisfy the expectations of our clients. The Sedimentation Studies are high quality equipments which are manufactured at our ultramodern infrastructure facility in compliance with the prevailing industrial standards. These are supplied to clients in different specifications at affordable market prices. Known for their sturdy designs and durable exterior, these equipments are highly demanded by chemical engineering laboratories.
Descriptions of Sedimentation Studies Apparatus
Settling or sedimentation is the separation of solid particles from fluids under the gravitational force. When a solid particle moves in a fluid. Then a number of forces are acting on it: 1. The gravitational force, acting downward. 2. The buoyant force, acting upward. 3. The drag force, acting upward. When a particle fall in a fluid under constant force, e.g. force of gravity, then particle accelerates for some time, but when the accelerating force equals the retarding force (Buoyant force and Drag force) then the resultant force acting on the particle will be zero, and particle quickly reaches velocity, which is the maximum attainable under the circumstances and which is called the terminal velocity. When slurry is prepared in a container and then allowed to remain undisturbed for some time, four settling zones will appear as below: A Supernatant Layer C Transition Zone B Slurry Zone D Concentration Sludge Zone. With the passage of time, the height of the different zones will vary and ultimately zone A of clear liquid and zone D of the sludge will be left. When all the solid particles settle in zone D, then this is critical stage and after this no settling takes place. With further passage of time, the height of the zone D will decrease due to the compression of the sludge on account of its own weight. Settling can be free settling or hindered settling. But most of the slurries settle under hindered conditions. Free settling is that in which the motion of one particle is unaffected by the motion of the other particle while in case of hindered settling many particles are present so there is mutual interference in the motion of the particles and the velocity of motion or rate of settling is reduced. The present set-up with 5 Nos. of Borosilicate Glass Graduated Cylinders is designed to study the zone settling depending upon the concentration and characteristics of the particles. These cylinders can be easily removed for cleaning. Rate of change in height of the various liquids/solids interfaces with respect to time can be measured with the help of stop watch.

Experimentation of Sedimentation Studies Apparatus

To determine Effect of initial concentration and initial suspension height on sedimentation rates. Effect of particle size distribution.Use of flocculating additives.
Features:
  • Reasonably priced
  • Damage-resistant
  • Efficient performance

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Demonstration Pelton Turbine

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Pelton Turbine We are able to offer a wide range of Pelton Wheel Test Rig. It is manufactured using high grade raw material and innovative technology in compliance with globally accepted norms of quality. The offered range is widely acclaimed in the market, owing to its specific attributes like high efficiency and fine finishing. Our Clients can avail the pelton wheel test rig from us within stipulated time period.

Features
  • Easy to functionality
  • Sturdy construction
  • Negligible maintenance
Other Descriptions The unit is designed to show students how an impulse turbine works and test its performance The turbine power is adjusted by means of the nozzle cross-sectionThe experimental unit consists of the Pelton wheel, a needle nozzle used as control device (control flow rate), a rope brake dynamometer for loading the turbine and a housing with a transparent front panelThe transparent cover enables you to observe the water flow, the wheel movement during operationThe pressure at the turbine inlet is recorded with a pressure gaugeA spring balance to measure brake power and a digital RPM indicator are attached to wheel shaftThus, the mechanical power output of the turbine can be determined. Flow rate measurement are provided by orifice meter Specifications of Pelton Turbine
  • Pelton Wheel: 300 mm Diameter with 18 Buckets
  • Sump tank capacity: 200 liters High Grade Plastic
  • Flow rate measurement: Orifice meter with Burdon type pressure gauge
  • Pump : Monoblock type, 4 litre/sec, Head 20 mtrs; Motor 5 HP
  • Piping with necessary Valves and Fittings
  • Digital RPM Indicator
  • Detailed Technical Manual and On-site Training

Send Bulk Enquiry

Flow Through Helical Coil

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
MaterialMS/SS

Flow Through Helical Coil

Micro Teknik delivering a wide gamut of Flow Through Helical Coil. This coil is designed by our adroit professionals using high-grade raw materials and modish technology, who have in-depth knowledge about the industrial standards. Available with us in numerous specifications, to meet the varied demands of our respectable clients.
Features:

Rust proof
Less maintenance Maximum strength
Specifications:
Helical Coil Material Stainless Steel Dia – 12”No. of Turns 15Coil Tube Dia OD 21mm, ID 17mm (Approx.)Sump Tank Material Stainless Steel/PVC, Capacity 50 Ltrs Water Circulation FHP Pump, Crompton/Sharp make Manometer 2 Nos Flow measurement Rotameter Piping GI and PVC Control panel comprising of Standard make on off switch, Mains Indicator etc The whole set-up is well designed and arranged in a good quality painted structure

Send Bulk Enquiry

Film Wise and Drop Wise Condensation Apparatus

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Film Wise and Drop Wise Condensation Apparatus
Condensation is a phase change heat transfer process occurring in many industrial applications, such as in steam power plants, refrigeration plants etc. Thus this is one of the important heat transfer process present in mechanical and chemical engineering application. The condensation of Vapour on a surface is of two types: 1. Drop wise Condensation. 2. Film wise Condensation. This set up is designed for finding heat transfer co-efficient of two types of condensation and for visualization of these processes. It consists of a vertical frame. Condensation tubes are fitted inside compact glass cylinder. Steam generator is fitted at the backside of the cylinder. Steam comes directly from generator to cylinder. Two valves are fitted to control flow rate of water in individual tubes. Digital Temperature Indicator monitors temperatures. Pressure gauge and Rotameter can observe steam pressure and cold, water flow rates respectively. A Digital temperature Controller is provided for controlling the temperature of Steam. Water level indicator is provided to safeguard the heater. Condensate is measured by measuring cylinder.
Experiments
  • To study the Film wise & Drop wise condensation of steam on a vertical surface
  • Visualization of condensation process in drop wise as well as film wise
  • Utilities Required

Water supply 5 lit/min (approx.)Electricity Supply: 1Phase. 220 V AC. 1.5 kWTable for set-up support

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Venturi Meters

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
ApplicationFluid Mechanic Lab

Venturimeter
Venturimeter MT-101712

An educational Venturi tube that allows students to study the Venturi meter and Bernoulli's Theorem and to make direct comparisons between the results obtained by experimentation and those predicted by theory.A Venturi meter is used to determine the flow rate of fluid in a pipe. Venturi Meter is comprised of a horizontal Venturi tube, a downstream flow-control valve and eleven pressure tappings connected to water manometers (piezometers). A common manifold above the piezometers includes an air pressure control valve.The inclusion of eleven piezometers allows study of the pressure distribution along the convergent-divergent passage within the Venture tube.The is designed for use with the Gravimetric or Volumetric Hydraulics Benches (available separately). These benches measure absolute flow rate which can be used by students to find the Venturi meter coefficients over a range of flow conditions.The Venturi meter is a device used to measure the flow rate. As shown, it consists of a tapering contraction section, along which the fluid accelerates towards a short cylindrical throat, followed by a section which diverges back to its original diameter.As velocity increases from the inlet section to the throat, there is a fall in pressure, the magnitude of which depends on the rate of flow. The flow rate may therefore be inferred from the difference in pressure, as measured by pizometers placed upstream and at the throat.The device is used to determine the discharge coefficient or the Venturi meter coefficient (C).This value lies between 0.92-0.99 and varies from one meter to another.

Send Bulk Enquiry

Flow Channel Apparatus

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Flow Channel Apparatus
Flow Channel equipment allows the student to study water flow in an open channel and also verify the Chézy equation and Mannings Friction Factor. It is designed for use with Hydraulics Bench fitted with Auxiliary Pump Unit, but can be used as a standalone unit when connected to a suitable water supply and drain. The channel is supplied with weir, scales and tilt capability.

Send Bulk Enquiry

Fix And Fluidised Bed Dryer

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Fix And Fluidised Bed Dryer Apparatus

Fluidised Bed Characteristics Micro Teknik We are leading manufacturer and exporter of a wide range of Fluidized Bed Dryer. The Salt is fluidized, each particle meets the hot air, discharges moisture, gets dry and at the same time travels forward without any mechanical push. We have proven-technology for designing dryers of any capacity. In this state, the solids behave like a free flowing boiling liquid. Clients can avail this products as per there requirements.
Scope of Experimentations
  • To study fluidization characteristics
  • To study relationship between velocity of fluid and pressure drop per unit length
  • Utilities Required:
  • Electricity : 500 watts, 220 V, 1 Phase
  • Floor Area : 0.75 m x 0.75 m

Technical Details:
  • Column : Material Borosilicate Glass
  • Packing : Glass Beads
  • Water tank : Material Stainless Steel, Capacity 30 Ltrs
  • Water Circulation : FHP Pump, Crompton/Sharp make
  • Flow Measurement : Rotameter for water
  • Pr. Drop Measurement : Manometer
  • The whole set-up is well designed and arranged in a good quality painted structure

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Fludisation And Fixed Bed Heat Transfer Unit

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Fludisation and fixed Bed Heat Transfer Unit
Item Code: MTS-916
DESCRIPTION
This is a dryer in which moisture removal takes place by fluidization of solids particles by hot air. The set-up fitted with a specially designed, vertical Glass Column. The lower portion of the column is filled with fluidizing material. The material is supported on the screen mesh held between two flanges. Air from a compressor is heated in the heater box and passed through the column. Flow control and by-pass valve are fitted to regulate the airflow. At the top outlet of column a cyclone is provided to collect any solid particles taken out by the air stream.
EXPERIMENTATION
  • To study the fluidized bed drying. To plot the drying curve under fluidized bed condition.

UTILITIES REQUIRED
Electricity Supply 1 Phase, 220 V AC, 3 kW.Granular and free flowing solid of size 1 to 2 mm.
TECHNICAL DETAILS
Column : Material Borosilicate Glass Dia. 80 mm. Total Length 500mm.Cyclone Separator : Material Stainless Steel, Compatible Capacity with collector. Air Circulation : By forced draft fan, Arrangement is done vary the air flow rate. Heating Chamber : Compatible capacity Heater : Nichrome wire heater Temperature Sensors : RTD PT-100 type.Control panel comprises of :Digital Temp. Controller : 0 199.9°C (For Hot Air) Standard make on/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided alongwith the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.

Send Bulk Enquiry

Axial Flow Impulse Turbine Demonstration

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Axial Flow Impulse Turbine Demonstration

Model No : MTS-IT1106

Specification Axial-Flow Impulse Turbine :

Axial flow impeller turbine demonstration model, designed for use in conjunction with the Turbine Service Unit. The turbine unit is placed on the Turbine Service Unit and supplied with water by the service unit. The turbine housing is made of Plexiglass so that the axial water jet can be clearly observed. A braking device is fitted to the impeller shaft of the turbine. The braking device is in the form of a band brake. The load and moment on the turbine shaft is measured with a strain gauge fitted to the braking device. An inductive proximity switch measures the rotational speed of the turbine.

Specification:
  1. Axial flow impeller turbine demonstration model.
  2. Electronic measurement of the moment on the turbine shaft using a band brake.
  3. Electronic measurement of the turbine rotational speed with inductive proximity switch.
  4. Transparent turbine housing.

Send Bulk Enquiry

Line Ranger

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Line Ranger
Item code: MTS-32

Our expertise enables us to develop a broad range of measuring and survey equipment and instruments such as Line Rangers. Manufactured using high grade metal and alloys, these line rangers can be availed in standard as well as customized sizes and specifications. Used for various testing and measuring activities by our clients, our range can be availed at most descent prices.

Additional Information:

Item Code: MTS-32

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Flash Point and Fire Point Apparatus

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

 FLASH POINT AND FIRE POINT APPARATUS

Flash & Fire Point Apparatus used for determining the flash point of fuel oils and lubricating oil, bitumen other than cutback bitumen and suspension of solids in liquids, having a flash point above 49°C. The apparatus consists of brass test cup with handle removable cup cover with the spring operated rotated shutter having oil test jet flame device, stirrer with flexible shaft. The assembly rests in Air Bath which is covered with dome shape metal top. The cup assembly is positioned in a cast iron air bath, fitted with a chrome plated brass top having electric heater with temperature controller. Suitable for operation on 220V, 1Ph, 50Hz AC Supply.

 

Suitable for Operation on 220V, Single Phase, 50Hz, AC Supply.


Send Bulk Enquiry

X
 





Explore More Products