Send E-mail Send SMS

Microteknik

Microteknik

Microteknik

ISO 9001:2015 Certified

Sadar Bazar, Ambala, Haryana

nav icon

Engineering Soil Testing Equipment

Microteknik are offering a wide range of Engineering Soil testing Equipment. such as below. Soil Testing Equipments and Material Testing Machine Manufacturers, Cement Testing Equipments, Bitumen Testing Machine for Laboratory Testing. Equpments such as Direct Shear Apparatus Supplier, CBR Test Apparatus Manufacturer, Soil Testing Equipments, Plate Bearing Testing Apparatus, Survey Testing Equipments and Industrial Testing Equipments. Manufacturers & Exporters of Civil Lab Soil Testing Equipments and Machine. Civil Lab Equipments - Civil Lab Testing Equipment , Civil Engineering Testing Equipment, Civil Lab Cement Testing Equipment , Civil Lab Aggregate Testing Equipment , Civil Lab Concrete Testing Equipments. Construction and Civil Material Testing Equipments suppliers and exporters of testing equipment, soil testing equipment, laboratory testing equipment, laboratory equipment covers, triaxial, direct shear, consolidation and permeability soil testing equipment. We are Material Testing Equipments Manufacturer, Lab testing equipments manufacturers, Measuring equipments manufacturers, Survey Testing Manufacturers, Manufacturer testing equipments, Exporters of Testing Equipments Training Systems & Kits.

Teknik Laboratory Cement Autoclave

REQUEST CALLBACK
Teknik Laboratory Cement AutoclaveClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

PhaseSingle
MaterialStainless Steel
Insulation WallDouble Wall
Temperature Range215 Degree C
Pressure Range (psi)56-284 psi
BrandTeknik
AccessoriesSpecial rack, Silicon rubber Gasket
InstallationYes
Size10.5 cm dia x 40.5cm Height
Voltage230 Volts AC
Mount TypeFloor Mounted Autoclave
Approval CertificateISO : 9001 : 2008,CE Certificate
ConditionNew

Cement Autoclave and Laboratory Cement Autoclave
Item code: MTS-436

Microteknik are offering a wide range of Laboratory Cement Autoclave.

Description & Specifications:
The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches. The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated wire, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge.Rating 3000 watts, 15 Amp

Standard Accessories: Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner

Feature
  • Spare heater set
  • Spare Silicon Gasket
  • Spare Pressure gauge
  • Spare safety valve

Additional Information:

Item Code: MTS-436

Send Bulk Enquiry

Fatigue Testing Machine

REQUEST CALLBACK
Fatigue Testing MachineClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

Driven TypeMotor Driven
Power (Kw)Electric Power
Product TypeTesting
Display TypeDigital
Motor (HP)2 HP
Automation GradeSemi-Automatic
ConditionNew
BrandTeknik
MaterialMS/SS

Laboratory Fatigue Testing Machine

We hold vast acumen and expertise in manufacturing, supplying and exporting premium quality Fatigue Testing Machine. The machine offered by us is duly tested on set industry parameters, before delivering to the clients. Used for measuring fatigue strength of materials, our testing machine is widely used in laboratories, research institutes and construction industries. Clients highly appreciate our Fatigue Testing Machine for its attributes like compact design and accurate calibration.

Specifications of Fatigue Testing Machine
  • Light weight, compact size, simple design.
  • Simple lever system for changing load.
  • Accurately calibrated as per
  • 10 Digit electronic counter instead of mechanical counter can be supplied at additional price and the model is termed .
  • Machine with maximum bending movement upto 400 kg/cm can be offered on request.

Technical Specification

1Maximum bending momentkg cm200
2Bending movement adjustablekg cm0-200
3Ranges1-kg cm
11-kg cm		30-100
100-200
4Gripping dia. of specimenmm12
5Testing dia. of specimenmm8
6Rotating speedrpm4200
7Accuracy of applied bendingmoment+-1%
8Digital counter No. of digits10
9Power requiredH P0.5
10Main supplyA.C. ph220V, 50 Hz

Send Bulk Enquiry

Compression Testing Machine

REQUEST CALLBACK
Compression Testing MachineClick to Zoom
  • Compression Testing Machine
  • Compression Testing Machine

Ask for Price

Product Price: Ask Latest Price

Product Details:

ConditionNew
Display TypeDigital
ColorBlue Dark
BrandTeknik
PortableNon Portable

Compression Testing Machine
Item code: MTS-454C

Microteknik are offering a wide range of Compression Testing Machine. (Electrically cum Hand Operated-Three Gauges)
This is a hydraulic, electrically operated unit, designed for conducting compression tests on concrete specimens up to 20 cm. Diameter (or width and depth) and 30 cm, in height and also rocks and various other materials. Cold Crushing Strength (CCS) test is also possible.The machine consists of a steel cross head and cast iron base with two pillars connecting the base and cross head by means of nuts. The hydraulic jack is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the with the help of a centering pin. Loading is accomplished by the upward movement of the motorized pumping unit is of plunger type and is connected to the jack by means of a steel connecting tube.A maximum red pointer is provided to facilitate taking of the readings after failure of specimens. The pressure gauges of 20 cm diameter with isolating valves are fixed on the pumping unit at an angle for easy readability..The machine is fitted with control which enables the rate of application of load to be varied. The machine is equipped with facilities for hand operation as well.The electrical pumping unit is fitted with three micro switches one for each pressure gauge and will switch off the machine automatically as the load on the machine approaches its full capacity of the gauge in case the isolating valves are not operated. This will protect the pressure gauges and the whole unit so that in case of break down of power supply, the machine will stop and will not restart unless the starting switch is operated.

Additional Information:

Item Code: MTS-454C

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Substance Bar

REQUEST CALLBACK
Substance BarClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

Packaging TypeWooden Box
BrandTeknik
ConditionNew
UsageSurveying
Tripod MaterialAluminum

Substance Bar
Item code: MTS-33

Substance Bar complete with all standard acc and telescopic tripod stand name of wood/aluminum .Generally required in Draughtsman Suveyor trade of ITI as per NCVT syllabus.

Additional Information:

Item Code: MTS-33

Pay Mode Terms: T/T (Bank Transfer)

Delivery Time: As Per Customer Need

Send Bulk Enquiry

Laboratory Concrete Motor Mixer

REQUEST CALLBACK
Laboratory Concrete Motor MixerClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

Brand/MakeTeknik
ConditionNew
PortableYes
BrandTeknik

Laboratory Concrete Motor Mixer
Item code: MTS-423

Microteknik are offering a wide range of Laboratory Concrete Motor Mixer.Concrete mixer laboratory type, electrically operated. Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easy to tilt 1. 1/2 to 2cu.ft.mix. The total drum volume is however 3cu.ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with ½H.p. electric motor. Suitable for operation on 220/230 volts A.C. single phase. This multi flow mixer absorbs fewer air during mixing, requires shorter mixing time and grants a perfect homogeneity in mixtures having a low water and cement ratio. The pan is easily removable by means of a trolley. The blades are hardened against wear.

Additional Information:

Item Code: MTS-423

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Flexure Testing Machine

REQUEST CALLBACK
Flexure Testing MachineClick to Zoom
  • Flexure Testing Machine
  • Flexure Testing Machine
  • Flexure Testing Machine

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
MaterialMS/SS
Model NumberMTS-429B
Automation GradeManual

Flexure Testing Machine
Item code: MTS-429B

We are offering a wide range of Flexture testing machine motorised and Flexure Testing Machine.
Descriptions
It is used for testing 40mm x 40mm x 160mm mortar specimens for flexural strength. (rilem cembureau test) by single point loading.
Features of Flexure Testing Machine
Specifications
It is a motorized, mechanical unit. The speed is adjusted so that the load increase on the specimen is between 4 to 6 kg/sec. A flexure test attachment for keeping the specimen in position is also supplied. This consists of two rollers 10mm. diameter and spaced 100mm apart, and a third roller of the same diameter equidistant from the first two and for transmitting the applied load to the opposite face of the prism. The unit is for operation on 230 Volts, single phase, 50 cycles A.C.supply. Loads are measured on a proving ring fitted with a sensitive dial gauge. Supplied without proving ring.
Accessories - Proving ring, capacity 500 Kn.

Additional Information:

Item Code: MTS-429B

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Swell Test Apparatus

REQUEST CALLBACK
Swell Test ApparatusClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Swell Test Apparatus
Item code: MTS-551

We are offering a wide range of Swell Test Apparatus.It is designed to determine the swelling pressure developed by soil specimens moulded to desired densities at knows moisture contents when soaked in water. The load applied to restrain the swelling is transferred to a load measuring proving ring through a perforated swell plate and a load transfer bar. The proving ring is attached to the lead screw of hand operated load frame. A soaking tank is provided for saturating the specimen and the base of the mould has channels and radial grooves with connecting holes it consists one each of :
Technical Specification
1. Load Frame, Hand Operated, Capacity 50 KN (5,000 kgf)2. Mould, 100mm dia x 127.3mm height (1,000ml volume) with base plate and collar3. Proving Ring, with integral boss, high sensitivity 2.5KN (250 Kgf) capacity4. Dial Gauge , 25mm travel, 0.01mm least count Lid & receiver in G.I. frame for 300mm dia x 450mm dia sieves5. Perforated swell plate, 100mm dia x 16mm thick6. Spencer, 100mm dia x 12.7mm thick7. Pair of Porous stones, 100mm dia x 12.7mm thick8. Load Transfer Bar9. Steel Ball

Additional Information:

Item Code: MTS-551

Send Bulk Enquiry

C B R Test Apparatus

REQUEST CALLBACK
C B R Test ApparatusClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

C B R Test Apparatus
Item code: MTS-435A

Microteknik are offering a wide range of CBR Test Apparatus. California Bearing Ratio Test Apparatus Manufacturer, C B R Test Apparatus Exporter.
Descriptions Of C B R Test Apparatus
To know California Bearing Ratio Apparatus Motorised Values in laboratory, it is useful in determining the load carrying capacity in the laboratory when in-place density and water contents are such that the degree of saturation is 80 % or greater, when material is conhensionless and coarse grained, such that it is not effected by changes in water contents and when the material has been in-place for considerable time. The loading is effected by means of a mechanical load frames which can be fixed to the under side of a truck.Salient Features Similar to above but supplied with bench mounting type 5000kgf. capacity load frame motorised, in place of load frame hand oprated. The lead screw of the load frame has a single constant rate of travel of 1.25mm/min. Accessories for Laboratory C.B.R. Apparatus
  • High sensitivity Proving Ring 3000kg. capacity with calibration chart and carrying case.
  • Dial Gauges 2 Nos.0.01mm x 25mm.
  • Annular metal weight 5 kg. 147mm dia with 53 mm dia. central hole.
  • Slotted metal weight, 5 kg. 147mm dia with 53 mm dia slot.

Additional Information:

Item Code: MTS-435A

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Direct Shear

REQUEST CALLBACK
Direct ShearClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Direct Shear Apparatus
MTS-465 
We are highly affianced in manufacturing, exporting and supplying superior quality Direct Shear Test Apparatus. Only high quality basic materials are used while designing the given direct shear test apparatus, for increased acquiescence with market standards of quality. This direct shear test apparatus is broadly valued in the market for its perfect quality. Along with that, our direct shear test apparatus is presented in different specifications and can be modified, as per exact needs of our customers and at suitable rates.
Technical Specification
Direct Shear (Motorized Single Speed)Same as above but electrically operated to give a single constant rate of stain on 1.25 mm / min. Suitable for 230 V A.C. Weight 175 kg. approx.
  Features
  • High performance
  • Energy efficiency
  • Robust construction

Additional Information:

Item Code: MTS-465

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Consolidation Apparatus

REQUEST CALLBACK
Consolidation ApparatusClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Consolidation Apparatus
Item code: MTS-440

Microteknik are offering a wide range of Consolidation Apparatus Three Gang Model. Consist of 3 consolidation test assemblies mounted on a single frame. Complete wigh 3 sets of consolidometer cell assembly for 60 mm dia samples and three sets of weights each giving 10 kg/sq.cm. on each sample.

Additional Information:

Item Code: MTS-440

Send Bulk Enquiry

Aggregate Impact Tester

REQUEST CALLBACK
Aggregate Impact TesterClick to Zoom
  • Aggregate Impact Tester
  • Aggregate Impact Tester
  • Aggregate Impact Tester

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Aggregate Impact Tester
Item code: MTS-401

We are offering a wide reange of Aggregate impact tester.

Determining the aggregate impact value of coarse aggregate. Consists of a base weighing between 22-30 kg with a lower surface of not less than 30 cms and support columns to form a rigid frame work around quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380+-5.0 mm. The hammer is provided with a locking arrangementThe test equipment and the test procedure are quite simple and it determines the resistance to impact of stone aggregates simulating field condition. This test can be performed even at construction site or at stone quary, as the apparatus is simple and portable. Aggregate impact value test also gives an indirect indication of the strength characteristics of aggregate. Aggregate impact value of a sample also depends on the shape factors such as flakiness index and elongation index of the aggregates. It has been found that for majority of aggregates, the aggregate crushing value and aggregate impact values are numerically similar within close limits. For deciding the suitability of soft aggregates in base course construction, aggregate impact test is commonly used. A modified impact test is also often carried out in the case of soft aggregates to find the wet impact value after soaking the test sample in water.

Additional Information:

Item Code: MTS-401

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Bitumen Extractor

REQUEST CALLBACK
Bitumen ExtractorClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
Installation ServicesYes
Hand OperatedYes

Bitumen Extractor
Item code: MTS-410 

Microteknik are offering a wide range of Bitumen Extractor. Such as Bitumen Extractor, Centrifuge Extractor, Bitumen Extractor Hand Operated, Bitumen Extractor Electrically Operated,
Descriptions of Bitumen Extractor
This instrument is used for determination and checking of bitumen percentage in bituminous mix, the mix is added with a solvent and dissolved bitumen is removed by centrifugal action. Consists of a removable aluminum rotor bowl, capacity 1500 gms. with a cap and tightening nut. The bowl assembly is mounted on a vertical shaft which protrudes from a cast housing. This shaft and thus the bowl is rotated fast manually by enclosed gears in the cast body and handle. Solvent is introduced during the test through the holes in the cap of the housing. A drain is provided to collect dissolved bitumen coming out of the rotating bowl and getting collected in the housing.

Additional Information:

Item Code: MTS-410

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Concrete Permeability Test Apparatus

REQUEST CALLBACK
Concrete Permeability Test ApparatusClick to Zoom
  • Concrete Permeability Test Apparatus
  • Concrete Permeability Test Apparatus

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Concrete Permeability Test Apparatus:
Item code: MTS-438

Concrete Permeability Three pressure gauges for indicating pressure in each cell are supplied apart from the main pressure gauge which indicates pressure in chamber
Features
Available for three samples of size 150mm dia X 150mm high.Available for three samples of size 100mm dia X 100mm high.
Accessories Compresssor with pressure gauge 0-20 kg/cm sq. with automatic pressure valve and pressure rubber hose. Suitable for 440 volts A.C. three phase. Specimen casting mould C.I. for 100mm dia X 100 mm high cylinders, Specimen casting mould C.I. for 150mm dia X 10mm high cylinders, Specimen casting mould C.I. for 150mm cubes, Blow stove 1/2 litre capacity, Resin, Bees Wax, Wire brush, Chissel, Spare glass cylinder 500cc capacity a) Complete with 150mm Gun Metal mould, Single cell
b) Complete with 150mm Gun Metal mould, Three cell
Compressor for above, if required, pressure upto 300 PSI (Double Cylinder

Additional Information:

Item Code: MTS-438

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Compaction Factor Apparatus

REQUEST CALLBACK
Compaction Factor ApparatusClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
Automation GradeManual

Compaction Factor Apparatus
Item code: MTS-433

Specification :
It consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame. The lower openings of the hoppers are fitted with hinged trapdoors having a quick release catches. A circular metal plate is provided to cover the top of the cylinder. Supplied complete with one plaster's trowel and one tamping rod, 16mm dia x 600mm long, both ends rounded.
The apparatus is used for determining the workability of fresh concrete, provided the maximum size of the aggregate does not exceed 38mm. The test is particularly useful for concrete mixes of very low workability where true slump values are not reliable.

Additional Information:

Item Code: MTS-433

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Air Entrainment Meter

REQUEST CALLBACK
Air Entrainment MeterClick to Zoom
  • Air Entrainment Meter
  • Air Entrainment Meter
  • Air Entrainment Meter

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
ModelMTS-404
ApplicationLaboratory, Soil Testing equipment

Air Entrainment Meter
Item code: MTS-407

Entrainment of a small amount of air in the cement concrete has been found to improve considerably the durability of concrete. Further, when use of admixtures is to increase workability of concrete, a check of the air content is required to ensure that the percentage of air remains between 1 to 2% to get the optimum performance of the concrete structure. Air Entrainment Meter is having a capacity of 0.005 m3 (5 Litres), suitable for aggregate size upto 38mm. Each air entrainment meter is supplied complete with a calibrating cylinder, pressure gauge, funnel, measuring jug, straight edge and a hand pump.
It consists of an aluminium vessel with built in hand operated pressure pump, connected to the measuring gauge showing directly the air content in percentage. Air content range:0·10% div. 0.1% up to 8% and0.5% over 8%Dimensions :Dia. 250x450 mm

Additional Information:

Item Code: MTS-407

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Universal Extruder Frame Hydraulic

REQUEST CALLBACK
Universal Extruder Frame HydraulicClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Universal Extruder Frame Hydraulic
Item code: MTS-467

Microteknik are offering a wide range of soil testing equipment and Universal Extruder Frame Hydraulic. The extractor frame is used for taking out soil samples compacted or undisturbed, from 100mm dia and 150mm dia cylinders such as Core Cutters, Proctor moulds, C.B.R. moulds etc.

SPECIFICATION :

It consists of a 50Kn capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 4”/100mm dia and the other of 6”/150mm dia moulds are supplied Height of thrust plate is adjustable.

ACCESSORIES :

Set of plungers adaptors and thrust plates for 38mm, 50mm and 75mm dia specimen.

Additional Information:

Item Code: MTS-467

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Field Density Test Apparatus

REQUEST CALLBACK
Field Density Test ApparatusClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
MaterialMS/SS

Field Density Test Apparatus
Item code: MTS-470

This apparatus is used for the in place determination, of the dry density of compact, fine and medium grained soils and for layers not exceeding 50 cm thickness. We offer Field Density Test Apparatus - Sand Replacement. Sand Replacement Method:

Three sizes Available

10cm (Small Size)15cm (Medium Size)20cm (Large Size)10cm (Small Size) :- Sand Replacement Method. Consists of Sand Pouring Cylinder, one calibrating container 10 cm dia & a square tray of 30 cm x 30 cm with a central hole of 10 cm diameter. Relevant Standard : IS : 2720(Part-XX VIII)
15cm (Medium Size) : Sand Replacement Method. Consisting of Sand Pouring Cylinder container metal tray hole in the center.
20cm (Large Size) : Sand Replacement Method. with calibrating container of 250mm internal depth, one metal tray 450 mm square and 50 mm deep with a 200 mm dia hole in the center.

Accessories

  • Metal tray, 30 cm square and 4 cm deep without hole.
  • Test forms pad of 50

Additional Information:

Item Code: MTS-470

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Tile Abrasion Testing Machine

REQUEST CALLBACK
Tile Abrasion Testing MachineClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

ConditionNew

Tile Abrasion Testing Machine
Item code: MTS-576

We are offering a wide range of Tile Abrasion Testing Machine.
This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions.This counter is Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On Request machine to operate on 230 V A.C. Supply can also be supplied.

Additional Information:

Item Code: MTS-576

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Cement Permeability

REQUEST CALLBACK
Cement PermeabilityClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Cement Permeability Apparatus
Item code: MTS-439

We are involved in providing to our valuable clients Cement Mortar Permeability Apparatus which is designed for water proofing of concrete of mixture and special water proof cements are used. Specimen with or without such water proofing Compounds. Adding to that, these are available at the most economical rates to our prestigious customers.
Specification

  • Cement Permeability (Pozzolona Cement Mortar) without air compressor
  • Single Cell Model
  • Three Cell Model
  • Six Cell Model
  • Compressor for above, if required, pressure upto
  • Straight Edge, 3 meters long, made of M.S., complete with Wedge
  • Camber Board, 3 meters long

Additional Information:

Item Code: MTS-439

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Extractor Frame

REQUEST CALLBACK
Extractor FrameClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
ModelMTS-479

Extractor Frame
Item code: MTS-479

We are offering a wide range of Extractor Frame, Extractor Frame Hydraulic.
Designed to extract specimens from almost every type of sampling tube and mould used in solid engineering laboratory or in the field. It can be mounted vertically or horizontally as desired. It has an unique feature that three 38 mm dia sample.This extractor Frame is used for taking ut soil samples compacted or undisturbed, from 100 mm dia and 150 mm dia cylinders such as core cutters, Proctor moulds, C.B.R. moulds etc.
Salient Features Specifications

It consists of a 5 Tone capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 100 mm dia and the other of 150 mm dia moulds are supplied. One thrust plate for 150 mm dia and one for 100 mm dia specimens are also supplied. Height of thrust plate is adjustable.
Accessories
Set of Plungers adaptors and thrust plates for 38 mm, 50 mm and 75 mm dia specimen.

Additional Information:

Item Code: MTS-479

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Flow Table Hand Operated

REQUEST CALLBACK
Flow Table Hand OperatedClick to Zoom
  • Flow Table Hand Operated
  • Flow Table Hand Operated
  • Flow Table Hand Operated
  • Flow Table Hand Operated

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
MaterialMS/ SS/ Brass
Table TopYes

Flow Table Hand Operated
MTS -472
We are offering a wide range of Flow Table Hand Operated Flow Table Motorize.

Descriptions

This is used for measuring the consistency of pozzolanas and also cement mortar and hydrated lime. Used for determining the workability of building lime.It comprises :i) One 300 mm dia polished steel table with three engraved circles of 70 mm, 110 mm and 190 mm dia at the top face.ii) A frame having a horizontal shaft carrying a cam on one side and a wheel on the other, adjusted to raise the table by 12.5 mm and allow it to fall freely.iii) Truncated conical mould 65 mm inside dia at the bottom, 40 mm inside dia at top and 90 mm high.
ACCESSORIES

1. Flow Mould.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Density Basket

REQUEST CALLBACK
Density BasketClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

MaterialMS/SS
BrandTeknik
ConditionNew

Density Basket
Item code: MTS-472

Microteknik are offering a wide range of Density Basket.For density tests on aggregates as per procedure laid down.

Features of Density Basket

Specifications Made of brass with stainless steel wire mesh 6.3mm size ruggedly constructed, approximately 20cm dia x 20cm high. Complete with handle

Additional Information:

Item Code: MTS-472

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Laboratory Vane Shear

REQUEST CALLBACK
Laboratory Vane ShearClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
ConditionNew

Laboratory Vane Shear

Item code: MTS-513A

Microteknik are offering a wide range of Laboratory Vane Shear Apparatus.Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen.Rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per IS specifications. The vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container .Supplied with set of four springs, one each of approx. 2 kgs/cm sq., 4kgs/cm sq., 6 kgs/cm sq. & 8kgs/cm sq. complete as above in a wooden carrying case.Electrically operated rate of rotating is 1/60 R.P.M. Suitable for operation on 230 V A.C. Single Phase.

Additional Information:

Item Code: MTS-513A

Send Bulk Enquiry

Rotap Sieve Shaker

REQUEST CALLBACK
Rotap Sieve ShakerClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

ConditionNew
BrandTeknik

Rotap Sieve Shaker

Item code: MTS-567

We are offering a wide range of Sieve Shakers, which is manufactured to make the sieving process easy and fast. These are available in various types such as dry and wet and find application in various civil engineering industries.
To make process of sieving simpler and quicker, Rotap Sieve Shaker is useful. This produces circular shaking of the sieves. At the same time the sieves are tapped. The mechanism for inparting circular action and tapping is oil immersed in a tank and in motorized. The shaker can accommodate upto 7 nos. Sieves of dia 150mm or 200mm. Suitable operation on 230 volts A. C. single phase

Additional Information:

Item Code: MTS-567

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Sieve Shaker

REQUEST CALLBACK
Sieve ShakerClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

ConditionNew
BrandTeknik

Sieve Shaker
Item code: MTS-566

We are offering a wide range of Sieve Shakers, which is manufactured to make the sieving process easy and fast. These are available in various types such as dry and wet and find application in various civil engineering industries. Sieve shaker, hand for 200 mm dia
Sieve shaker, hand for 300 mm & 200 mm dia Sieve shaker, hand for 450 mm & 300 mm dia. Sieve shaker electrically with rotary, gyratory motion & tapping action for 200 mm dia 220V, lPhAC Sieve shaker electrically for 200 mm dia with timer 0-60 minutes. Sieve shaker electrically for 200 mm dia with Digital timer 0-99 min.

Additional Information:

Item Code: MTS-566

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Curing Tank

REQUEST CALLBACK
Curing TankClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Curing Tank

Our company has been acknowledged in offering Curing Tank to the clients. Curing Tank can be modified according to client's requirement. Offered range is manufactured by using quality assured components with the aid of latest technology under the supervision of deft professionals. This product is widely used in diverse industries for various applications. Offered range is broadly praised by clients all around the nation. This product has been checked on various levels of quality at premise. This product is dispatched in quality assured packaging material for safe transportation.

Descriptions
  • 24 Hour cycle from time of mixing.
  • Controlled 35oC or 100oC ±2oC Curing Temperature for concrete.
  • Controlled 27oC ± 2oC Curing Temperature for grey cement.

The tank has been designed to accommodate 150mm/70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35oC or 100oC ± 2oC / 27oC +2oC , expect for the 15 minutes after immersion of the freshly made specimens.

Features:
  • High strength
  • Long lasting
  • Impact resistance

Send Bulk Enquiry

Kelley Ball Penetration

REQUEST CALLBACK
Kelley Ball PenetrationClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Kelley Ball Penetration

MTS -507

The apparatus is used to determine the workability of Portland cement concrete. The Kelly ball test is considered to be simple and much faster than the slump test. Twice the Kelly ball reading approximately equals the slump.
Features
Specifications It consists of a cylinder with a ball-shaped bottom and handle, together weighing 15 kg. A strip frame, guides the handle and serves as a reference for measuring the depth of penetration. The handle is graduated in MM. Penetration can be recorded to the nearest 0.5mm.

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Cylindrical - Moulds

REQUEST CALLBACK
Cylindrical - MouldsClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Mould Cylindrical

We are offering a wide range of Cylindrical Moulds. For testing concrete cylinders for compressive strength tests.
Specifications of Mould Cylindrical
The moulds is split vertically into two parts. The mean internal diameter is within 0.2mm and height is within 1mm. The ends are machined to 0.05. The base plate and top plate are machined flat to 0.03mm.
Mould, Cylinder, Cast iron, 15cm dia x 30cm height .Mould, Cylinder, Cast iron, 10cm dia x 20cm height .Mould, Cylinder, Cast iron, 30cm dia x 60cm height.

Send Bulk Enquiry

Ring And Ball Apparatus

REQUEST CALLBACK
Ring And Ball ApparatusClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

Automation GradeManual
ConditionNew
MaterialWooden and Brass

Ring And Ball Apparatus
Our company is one of the very proficient and well known companies in the line of manufacture, supply and export of a much wider range of supreme quality laboratory equipments, apparatuses and electrical appliances. We have also brought forth to our clients these ball & ring app which is widely used in several laboratory purposes. Our ball and ring apparatus is widely used in several regions of the country as well as in abroad and are appreciated for its supreme quality and features. We are providing these ball & ring app to our clients at very conventional range of prices.
Features

  • Very tough and robust construction
  • Extremely high durability
  • Corrosion resistant
  • Dimensionally accurate
  • Wide utility

Send Bulk Enquiry

Permeability Apparatus

REQUEST CALLBACK
Permeability ApparatusClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
ApplicationLaboratory
ConditionNew

Air Permeability Apparatus

MTS-PA1105

Empowered by our levels of exquisite professionals, we are involved in offering a wide range of Blain Air Permeability Apparatus. This product is manufactured using latest techniques and optimum quality raw material in order to maintain its adherence to universally accepted standards. Besides this, the offer qualitative product is tested by our quality controllers on various parameters in order to ensure its operational fluency. Moreover, our apparatus is vastly demanded in domestic markets.

Features:
  • Durability.
  • Compact design.
  • Optimum quality.

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Sieves Shaker Hand Operated

REQUEST CALLBACK
Sieves Shaker Hand OperatedClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

ConditionNew
BrandTeknik

Sieves Shaker Hand Operated
Item code: MTS-563

This is a light, portable but sturdy sieve shaker suitable for bench mounting. The side to side movement to the carrier which can take upto 7 sieves of 150 mm or 200 mm diameter is through a train of gears operated by a hand wheel. A heavy fly wheel ensures smooth operation.
Features of Sieves Shaker Hand Operated
FOR 20CM & 30CM DIA. SIEVES - same as above but carrier table and holder suitable to take 20cm as well as 30cm dia sieves. FOR 20CM DIA SIEVES - Specifications - This is similar to above sieve shaker but the gears are enclosed in a box on which the sieve carriage is mounted. In addition to the side rocking motion, there is also a taping action. Sieve Shakers are either Electrically Operated or Hand Operated

Additional Information:

Item Code: MTS-563

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Grain Size Analysis Apparatus

REQUEST CALLBACK
Grain Size Analysis ApparatusClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
ConditionNew

Grain Size Analysis Apparatus
This is for the determination of there sub sieve particle distribution in a soil sample by mechanical analysis. An analysis of this kind expresses quantitatively the proportions by weight of the various sizes of particles present in the soils. It is recommended as a standard procedure to use dispersion agent to avoid floculation.
Salient Features
Specifications :The apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson pipette fixed to it to be raised or lowered vertically. A sedimentation tube is held by a laboratory clamp provided on the stand below the pipette. The depth of immersion is measured by a scale graduated in mm at the side of the sliding panel. Supplied complete with Anderson pipette 10 ml. at the side capacity made from glass, and a sedimentation tube also of glass of 500 ml capacity and 50 Nos Test forms.

Accessories & Spares
  • Sedimentation pipette (Anderson pipette) 25ml.
  • Sedimentation tube 1000ml.
  • Sedimentation pipette 10ml.
  • Sedimentation tube 500ml.
  • Test forms pad of 50.

Send Bulk Enquiry

Static Cone Penetrometer

REQUEST CALLBACK
Static Cone PenetrometerClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Static Cone Penetrometer
Item code: MTS-424B

We are offering a wide range of Static Cone Penetrometer.Static Cone Penetrometer Capacity for reaching greater depths and to facilitate easy and constant rate of penetration 1 to 2.5cm/sec of the cone this engine-driven Static Cone Penetrometer of 100 KN (10,000 Kgf) capacity is preferable. The equipment consists of a hydraulic pump driven by a Diesel Engine. The whole system is mounted on a tow able trolley fitted with pneumatic wheels. The pumping unit and ram are connected by means of flexible pipes through a direction control valve. The hydraulic ram moves on a two pillar stand mounted on a trolley. Specification of Static Cone Penetromete
1.Penetration Cone, steel 60 cone angle, 10cm2 base area, with friction jacket One 2. Mantle Tube, 36mm uniform OD with sounding Rod working length 1 m Thirty 3. Load Measuring Head, with Automatic cut-off valve, and oil can without pressure gauges. 4. Pressure Gauge, 0-600 x 5 kg/cm One 5. Pressure Gauge, 0 100 x 1kg/cm One 6. Trusses Two 7. Screw Anchor 45 cm Six8. Screw Anchor 30 cm Six9. Screw Anchor 20 cm Six10. Screw Anchor Rod with cone Six11. Driving handle for Screw Anchor One12. Extension Pipe for Handle Four13. Clamping Screw with Nuts Six14. Extractor Tube with Connector One15. Tool Box One16. Tarpaulin Cover One

Additional Information:

Item Code: MTS-424B

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Concrete Test Hammer

REQUEST CALLBACK
Concrete Test HammerClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
MaterialMS/SS

Concrete Test Hammer
Item code: MTS-442

We are offering a wide range of Concrete Test Hammer.The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in mpa or psi can be found, with +/-20% of actual.

Specifications
Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.

Additional Information:

Item Code: MTS-442

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Field Density Core Cutter

REQUEST CALLBACK
Field Density Core CutterClick to Zoom
  • Field Density Core Cutter
  • Field Density Core Cutter

Ask for Price

Product Price: Ask Latest Price

Product Details:

ConditionNew
BrandTeknik

Field Density Test Apparatus
This apparatus is used for the in place determination, of the dry density of compact, fine and medium grained soils and for layers not exceeding 50 cm thickness. We offer Field Density Test Apparatus - Sand Replacement. Sand Replacement Method:

This is used for determination of in situ dry density of natural or compacted fine grained soil, free from aggregates. A cylindrical cutter is used to extract a sample of the soil with the help of a dolly and rammer. From the weight, density and the moisture, and dry density of the soil is ready calculated. It consists one each of: cylindrical core cutter mode of steel, 127.3mm. Long and 100mm internal diameter. Steel dolly, 25mm high with a lip to enable it to be located on top of the core cutter, rammer with detachable steel rod. Spare, optional extra and accessories:-1. Cylindrical core cutter 100mm i.d. x 175mm long2. Dolly3. Test form pad of 50.

Send Bulk Enquiry

Beam Mould

REQUEST CALLBACK
Beam MouldClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Beam Moulds
Moulds Beam :We are one of the leading manufacturers of all types of superior quality moulds. While, the standard size bar moulds are available as ready stock, we also custom design bar mould depending upon the specific requirements of the clients. All our products comply with IS standards and international safety norms.
Material Used
  • High grade quality cast iron
  • Iron

Available Sizes : Moulds are available in the following sizes :Beam Mould
  • 100x100x500mm
  • 150x150x700mm
  • 150x150x750mm

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Length Comparator

REQUEST CALLBACK
Length ComparatorClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Length Comparator
Item code: MTS-519

It is used to measure the drying shrinkage of concrete autoclave expansion of port land cement and potential expansive reactivity of cement aggregate combinations in mortar bars during storage, on self drying.
Specifications : The instrument consists of a channelled base over which two vertical pillars are fixed. An adjustable cross plate is at the top. A dial gauge, reading to 0.002mm x 12mm. can be fixed to the top cross plate. The plunger end of the dial gauge can be located upon a 6.5mm. dia ball or other reference point cemented in the specimen. On the base there is a similar recessed seating in which can be placed a second ball or reference point in the specimen. Complete with a stainless steel standardization bar with insulated grip and with 6.5mm dia. balls mounted in the ends.The unit can be supplied with a 0.0001 inch x 1/2 inch dial gauge at extra cost

Additional Information:

Item Code: MTS-519

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Planetary Mixer For Soil Testing

REQUEST CALLBACK
Planetary Mixer For Soil TestingClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
ConditionNew

Planetary Mixer For Soil Testing

We are offering a wide range of Mechanically Planetary Mixer for soil.This Equipment is to speed up the process with ease and accuracy to prepare cylindrical specimens for Marshal Stability Testing Machine. The mix is uniformly heated and mixed to yield homogenous mix and better moulds for testing. The same mixer without heating jacket and some modifications can also be used for mixing of soil, cement paste, mortars, pozzolanas etc.
Electrically operated, fitted with heating jacket for thorough mixing of Bitumen. The mixer is operated by 0.5 HP single phase electric motor connected to epicyclic type stainless steel paddle to impart both planetary and revolving motion for uniform mixing. Mixer blade has low speed of 140 + 5 rpm and medium speed of 285 + 10 rpm, while it also has a planetary movement of 62 + 5 rpm in low range and planetary movement of 125 + 10 rpm in medium range.A stainless steel bowl of approx. 5 ltr capacity with handle is also supplied. The 500 Watts heating jacket with energy regulator to control the temp. is fitted below the bowl. Complete unit is supported on a strong iron frame. Suitable to work on 220V, 50 Hz, AC single phase.

Send Bulk Enquiry

Sand Equivalent Apparatus

REQUEST CALLBACK
Sand Equivalent ApparatusClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik
MaterialMS

Sand Equivalent Apparatus
Item code: MTS-557

We are pioneers in offering patrons with a huge assortment of Sand Equivalent Test Apparatus at market leading prices. Manufactured with precision, this range is accredited in various sectors of the industry to function as per patrons needs and demands. This range is available with us in various sizes, grades and other detailed specifications as per patrons needs and demands. Moreover, a customized range can also be availed from us that suits patrons needs and
specifications.
  • Plastic Measuring cylinders
  • Carrying case
  • Weighted foot assembly
  • Irrigator tube
  • Rubber tubing complete with pinch clip
  • Syphon assembly, with 5 litre polythene bottle
  • Funnel

Accessories
  • Syphon Assembly,with 5 litre polythene bottle required.Supplied without rubber tubing
  • Calcium Chloride 2.5 kg
  • Formaldehyde, 40% solution, 2.5 litres
  • Glycerol Analar 2.5 kg
features
  • Compact design
  • Sturdy construction
  • Available in standard sizes
  • Available in wooden boxes
  • Abrasion resistant

Additional Information:

Item Code: MTS-557

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

Save time! Get the Best Deal

*Your information is safe with us.

Riffle Sample Divider

REQUEST CALLBACK
Riffle Sample DividerClick to Zoom

Ask for Price

Product Price: Ask Latest Price

Product Details:

BrandTeknik

Riffle Sample Divider
Item code: MTS-540

Microteknik are offering a wide range of Riffle Sample Divider.Used for sampling Aggregates, Ores, Refractory .

Specification

It consists of a sheet metal box mounted on Legs and fitted with a series of chutes of equal width which discharge the material alternatively in Opposite Directions into separate pans. The chutes of the Riffle are steep enough to allow rapid flowing of the Materials. The instruments has 14 Nos. Chutes of 13mm width and is complete with receivers.

Additional Information:

Item Code: MTS-540

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Send Bulk Enquiry

X
Looking for Engineering Soil Testing Equipment ?
 

Our Products

Sanitary Incinerator

 

Animal Incinerators

 

Medical Incinerator

 

Incinerator

 
view all »

Municipal Incinerator

 
view all »

Portable Incinerator

 

Poultry Waste Incinerator

 

Glass Crusher

 

Sanitary Pad Vending Machine

 

Kitchen Waste Incinerator for Kitchen Waste

 

General Waste Incinerator

 

Industrial Waste Incinerator

 

Liquid Waste Incinerator

 

Oil Fired Incinerator

 

Rotary Kiln Incinerator

 

Bio Medical Waste Incinerator for Hospital Waste

 

Waste Incinerator for Municipality Waste

 

Compost Machine

 

Medical Equipment

 
view all »

Microtome

 
view all »

Medical Anatomy Instruments

 
view all »

Pharmaceuticals Equipment

 
view all »

Fume Hoods

 

Clean Air Systems

 
view all »

Laboratory Autoclave

 

Heat And Refrigeration Systems

 
view all »

Chemical Engineering Lab Equipment

 
view all »

Fluid Mechanics Lab Equipments

 
view all »

Engineering Soil Testing Equipment

 
view all »

Surveying Instruments

 
view all »

Physiotherapy Equipment

 
Corporate Brochure





Explore More Products